CCNA Exam Preparation / Routing decisions
CCNA technique 111: IPv4 static next hops — explain the decision
Explain ipv4 static next hops clearly, test your assumptions, and build a reusable CCNA recall routine.
Environment and inputs: CCNA 200-301 v1.1 study; isolated Cisco IOS / IOS XE lab or paper exercise where applicable.
Understand the distinction
A static route must have a usable resolution path to its next hop.
Retrieve before reading
Close your notes and explain ipv4 static next hops in your own words. Draw the packet path, decision steps or study workflow. State when the explanation applies; a command or definition alone is not enough.
Apply it to a fresh example
Point a lab route at an unreachable next hop and inspect the routing table rather than assuming configuration equals installation.
Check your reasoning
Check your answer against the Cisco reference and lab evidence. Record the first incorrect assumption. Change one input, predict the new result and check it. Repeat later from blank notes.
Exam scope
Independent CCNA 200-301 v1.1 exercise, checked against Cisco resources on 2 November 2026. It is not a recalled exam question. The collection’s 200 techniques do not represent exam question counts or weights. Check Cisco’s current exam rules and your simulator’s supported syntax.